140° F – Max Water Temp | 1/2″ F – Inlet Thread | 3/8″F – Discharge Thread | 9.81 oz – Oil Capacity



RPM: 1750.
Shaft size: 24mm.
Max GPM: 2.5.
Max PSI: 2500.
Inlet Thread: 1/2” F.
Discharge Thread: 3/8” F.

The RCA25G25N is a commercial triplex plunger pump designed for a wide variety of high pressure washing applications. They are constructed with die-cast bodies and feature a brass head. Internal components include special thick solid ceramic plungers for long life and durability. Precision cast cooling fins are anodized for maximum heat dissipation. Oversized needle bearings on the drive side, and ball on the non-drive side together with the precision supports assure positive alignment and centering in relation to the crankcase. Valve cages of special designed Ultra-Form provide positive seating and extended life. Ball bearings on both sides of solid shaft drive pumps. One-piece connecting rods are special alloy aluminum, oversized for strength and load disbursement.

Manifold: High strength forged brass for long term use.
Bolts: Eight 6mm.
Plungers: NEW Ceramic Plungers, thicker wall to help pre- vent thermal shock.
Valves: Stainless Steel, valve seat o-ring is side mounted.
Seals: High quality high pressure seals. NEW low-pressure seal with a built in scraper.
Piston Guides: Two piece piston guides.
Drive End: NEW connecting rod with 12% more load sur- face. Large side cover sight glass, oversized bearing. Rear cover oil drain.
Crankshaft: Forged, precision ground.


Max GPM2.5
Max L/Min9.5
Max PSI2500
Power EBHP4.3
Bore Dia mm18
Stroke mm6.5
Crankshaft ID Stamp8
Inlet1/2″ F
Outlet3/8″ F
Max Temp140° F
Oil Capacity (oz)9.81
Shaft Size24mm
Shaft VersionN
Shaft TypeSolid

    Solicitud de Cotización

    Email (Requerido)



    Teléfono + Extensión

    Ciudad y estado


    Giro Empresa

    RFC (Requerido)